Tag: Engineering Breakthrough Award

Obuya Oloo | Engineering | Research Excellence Award

Published on by WSA Awards

Mr. Obuya Oloo | Engineering | Research Excellence Award

Durban University of Technology | Kenya

Mr. Obuya Oloo Tryphone is an emerging interdisciplinary researcher and engineer specializing in mechatronics, mechanical and industrial engineering, with a strong focus on design, simulation, fracture mechanics, and advanced manufacturing technologies. He holds a Bachelor’s degree in Mechanical Engineering and a Master of Engineering in Industrial Engineering, and is currently pursuing dual master’s programs in Mechatronics at ETH Zurich and Ashesi University under prestigious ETH4D and Tetra Pak scholarships. His research contributions include a peer-reviewed master’s thesis published with Wiley, a book chapter with Elsevier on additive manufacturing for energy storage applications, and applied engineering projects adopted in academic and industrial settings. He has collaborated with international faculty across Europe and Africa and contributed to infrastructure safety, materials research, and laboratory innovation. His work demonstrates clear societal impact through sustainable engineering, education mentorship, and climate-positive initiatives aligned with the SDGs.

ORCID Profile

Featured Publications

Tryphone Obuya Oloo, Oludolapo Akanni Olanrewaju, Samson Oluropo Adeosun, Mohammad Rezwan Habib (2026).
Experimental Analysis of Fracture Mechanics of Aluminum 7075 Alloy Plate With an Edge Crack Using MATLAB Software. Advances in Materials Science and Engineering • Journal Article 

 

Wei Huang | Engineering | Research Excellence Award

Published on by WSA Awards

Prof. Dr. Wei Huang | Engineering | Research Excellence Award

SINOMACH Research Center of Engineering Vibration Control Technology | China

Prof. Dr. Wei Huang is a senior researcher in engineering vibration control, vibration isolation, and intelligent structural control, with a strong focus on integrating optimization algorithms and deep learning into vibration analysis and mitigation. His research spans active, semi-active, and passive vibration control, magnetorheological dampers, low-frequency isolation systems, and vibration recognition and prediction using CNNs, ResNet, LSTM, Transformer, and reinforcement learning. He has authored more than 35 peer-reviewed journal papers, including SCI/EI-indexed publications, and contributed to 10+ academic monographs published by Springer Nature and leading Chinese publishers. He has played key roles in the development of national and group standards for engineering vibration control and holds over 25 granted patents, with many more under review. His work has been widely applied in precision equipment, industrial buildings, nuclear and seismic engineering, delivering significant societal and engineering impact.

Citation Metrics (Scopus)

1500

1200

500

200
0

Citations
1,254
h-index
18
Documents
181

Citations

h-index

Documents


View Scopus Profile

Kasye Shitu Mulat | Engineering | Editorial Board Member

Published on by WSA Awards

Mr. Kasye Shitu Mulat | Engineering | Editorial Board Member

Anhui University | Ethiopia

Mr. Kasye Shitu Mulat is an accomplished Irrigation Engineer and GIS & Remote Sensing Specialist with extensive academic, research, and professional experience in water resources, climate change impacts, hydrological modeling, and sustainable agricultural development. Born on 02 October 1991 in Borena Mekane Selam, Ethiopia, he currently serves as a Lecturer and Researcher at Assosa University, where he contributes to teaching, scientific research, and community-centered development initiatives. Mr. Kasye earned his Bachelor of Science in Water Resource and Irrigation Management from Aksum University with Very Great Distinction (CGPA 3.64). He later completed his MSc in Irrigation Engineering at Haramaya University, achieving an “A” thesis grade and a CGPA of 3.79. Further expanding his scientific expertise, he obtained a second Master of Science in GIS and Remote Sensing from Wollo University. His multidisciplinary background positions him at the forefront of research linking climate dynamics, hydrological systems, and agricultural water management. He has authored more than 11 peer-reviewed publications and has four additional manuscripts under review in reputable international journals. His research outputs span topics such as climate change impacts on irrigation potential, hydrological modeling of river basins, statistical downscaling, kriging-based spatial analyses, land use/land cover dynamics, and soil–water interactions. His works have contributed to improving understanding of the Upper Blue Nile Basin, Borkena Catchment, and other key Ethiopian watersheds. In addition to academic research, Mr. Kasye has led impactful community engagement projects, including free-energy garden irrigation initiatives and wheat production enhancement programs across Benishangul-Gumuz. These interventions have strengthened food security, improved smallholder livelihoods, and promoted climate-resilient agricultural practices. With advanced skills in ArcGIS, SWAT, HBV, R, GAMS, CropWat, and hydrological modeling software, he collaborates with agricultural offices, university research committees, and interdisciplinary teams. His contributions continue to influence regional water resource planning, climate adaptation strategies, and sustainable development efforts in Ethiopia.

Profile: Scopus

Featured Publications

  1. (2025). Assessing drought dynamics in a semi-arid basin: A multi-index approach using hydrological and remote-sensing indicators. Environmental Sciences Europe.

Darkhan Yelemes | Engineering | Best Researcher Award

Published on by WSA Awards

Assist. Prof. Dr. Darkhan Yelemes | Engineering | Best Researcher Award

Kazakh Automobile and Highway Institute named after L.B. Goncharov, Kazakhstan

Assist. Prof. Dr. Darkhan Yelemes is a distinguished Kazakh scholar and engineer recognized for his outstanding contributions to mechanical and civil engineering, with a specific focus on transport construction, road machinery, and urban infrastructure systems. His academic expertise lies in the development and optimization of construction, hoisting-transport, mining, and municipal machines, contributing significantly to the modernization of Kazakhstan’s industrial and transport sectors. Throughout his academic career, he has demonstrated strong leadership in research and education, combining technical innovation with applied engineering solutions aimed at advancing sustainable infrastructure. Dr. Yelemes has authored and co-authored more than 100 scientific publications, including high-impact papers indexed in Thomson Reuters and Scopus, as well as three textbooks, an electronic manual, and over a dozen methodological works approved by the Ministry of Education and Science of the Republic of Kazakhstan. His contributions are further evidenced by multiple patents—one national and six innovative patents of Kazakhstan—reflecting his commitment to applied research and technological advancement. He has also authored two monographs that have become important references in his field. A dedicated educator and researcher, Dr. Yelemes has collaborated with international institutions such as Wrocław University of Science and Technology (Poland), engaging in global academic exchanges that enhance cross-border research in transport and construction engineering. His achievements have been recognized with several prestigious honors, including the Gold Medal named after Academician A.A. Abdulin, the Medal “For Merit in the Development of Science of the Republic of Kazakhstan,” and the Bronze Medal named after A. Baitursynov for contributions to higher education and specialist training. As a member of national and international scientific societies, Dr. Yelemes continues to foster innovation, promote knowledge transfer, and support the next generation of engineers. His work exemplifies a deep commitment to advancing science and technology for societal and infrastructural progress, bridging academia and industry toward a sustainable and technologically advanced future.

Profiles: Scopus | ORCID

Featured Publications

  1. Wieleba, W., Leśniewski, T., Elemes, D., & Elemes, A. (2021). Friction processes of selected polymers sliding on steel and duralumin in a lubricant environment. Tribologia.

  2. Sherov, K. T., Mardonov, B. T., Buzauova, T. M., Tussupova, S. O., Smakova, N. S., Izotova, A. S., Gabdyssalik, R., Kurmangaliyev, T. B., & Elemes, D. E. (2020). The research of micro-hardness of side surfaces of teeth cylindrical wheels processed by “shaver-rolling device.” Journal of Theoretical and Applied Mechanics (Bulgaria).

  3. Alyzhanov, M. K., Sikhimbayev, M. R., Kuzembayev, S. B., Sherov, K. T., Sikhimbayeva, D. R., Khanov, T. A., Kurmangaliyev, T. B., Elemes, D. E., Donenbayev, B. S., & Musaev, M. M., et al. (2016). Optimization of the conditions of convective drying of thermosensitive materials. Journal of Theoretical and Applied Mechanics (Bulgaria).

  4. Abdeev, B. M., Yelemes, D. E., & Sakimov, M. A. (2013). Circular plate-membrane with small deflection and maximum sensitivity. In Advanced Materials Research (Vol. 739, pp. 376–381).

  5. Yelemesuly, Y. D., & Kalieva, A. D. (2013). Studying grading of non-metallic materials on the spiral screen. In Key Engineering Materials (Vols. 531–532, pp. 346–351).

Assist. Prof. Dr. Darkhan Yelemes’ work advances the design and optimization of transport, construction, and urban infrastructure systems, driving technological innovation in engineering. His research enhances industrial efficiency, supports sustainable infrastructure development, and fosters practical solutions with global applicability in mechanical and civil engineering.

Fan Feng | Engineering | Best Researcher Award

Published on by WSA Awards

Assist. Prof. Dr. Fan Feng | Engineering | Best Researcher Award

Peking University, China

Assist. Prof. Dr. Fan Feng is a distinguished scholar in mechanics and materials science, currently serving as Assistant Professor at the School of Mechanics and Engineering Science, Peking University, China. He earned his B.Sc. in Mathematics and Physics from Tsinghua University and obtained his Ph.D. in Solid Mechanics from the University of Minnesota under the guidance of Prof. Richard D. James. Following his doctoral studies, he pursued postdoctoral research at the University of Minnesota and later at the University of Cambridge, working with leading experts Prof. Mark Warner and Prof. John Biggins. Dr. Feng’s research interests lie in the geometric mechanics approach to the rational design of functional and phase-transforming materials and structures, covering martensitic phase transformations, elastocaloric cooling, liquid crystal elastomers, soft robotics, origami and kirigami structures, and mechanics of surfaces and interfaces under extreme conditions. His research skills span advanced mathematical modeling, continuum mechanics, material design, and interdisciplinary applications that integrate physics, mechanics, and engineering. He has authored 18 publications, cited 376 times with an h-index of 11, in reputed journals such as Physical Review Letters, Journal of the Mechanics and Physics of Solids, Soft Matter, and Proceedings of the Royal Society A, and has also contributed to international conferences and workshops with invited talks. Dr. Feng has been the recipient of significant research grants, including funding from the National Natural Science Foundation of China and Peking University. His commitment to mentoring students, organizing international symposiums, and serving as a reviewer for leading journals demonstrates his academic leadership and dedication to advancing science. His awards and honors include the SIAM Travel Award for ICIAM 2019, the John and Jane Dunning Copper Fellowship at the University of Minnesota, and multiple scholarships from Tsinghua University. In conclusion, Dr. Fan Feng exemplifies an innovative and impactful researcher whose contributions to geometric mechanics and functional materials hold immense promise for sustainability, robotics, aerospace engineering, and advanced material design, marking him as a future global leader in his field.

Profile: Scopus | ORCID

Featured Publications

  1. Wen, Z., Yu, T., & Feng, F. (2025). Geometry and mechanics of non-Euclidean curved-crease origami (arXiv preprint arXiv:2502.20147).

  2. Gu, H., & Feng, F. (2025). Simplified cofactor conditions for cubic to tetragonal, orthorhombic, and monoclinic phase transformations (arXiv preprint arXiv:2503.24224).

  3. Wang, L., & Feng, F. (2025). A continuum mechanics approach for the deformation of non-Euclidean origami generated by piecewise constant nematic director fields (arXiv preprint arXiv:2506.01309).

  4. Feng, F. (2025). Objective moiré patterns. Journal of Applied Mechanics, 92(8), 081002.

Le Chang | Engineering | Best Researcher Award

Published on by WSA Awards

Assist. Prof. Dr. Le Chang | Engineering | Best Researcher Award

Xi’an Jiaotong University | China

Dr. Le Chang is an Assistant Professor at the College of Electric Power Engineering, Shanghai University of Electric Power, China, specializing in networked control systems and nonlinear dynamics. He earned his Ph.D. from Shandong University, focusing on control theory and its applications. His professional experience includes serving as a Research Associate at the College of Electric Power Engineering, where he contributes to the development of advanced control strategies for complex systems. Dr. Chang’s research interests encompass the analysis and design of control systems in the presence of network-induced delays and nonlinearities, aiming to enhance the stability and performance of interconnected systems. His research skills are demonstrated through his work on cascade control for post-chlorine dosage during drinking water treatment under cyber attacks, published in the IEEE Transactions on Automation Science and Engineering. Additionally, he has contributed to the global stabilization of strict-feedback nonlinear systems with applications to circuits, employing an intermittent impulsive control approach, as detailed in the IEEE Control Systems Letters. Dr. Chang’s work on global output regulation for uncertain feedforward nonlinear systems with unknown nonlinear growth rates has been published in the International Journal of Robust and Nonlinear Control. His contributions to global output feedback stabilization for nonlinear systems via a switching control gain approach are featured in the International Journal of Control. Furthermore, his research on global sampled-data output feedback stabilization for nonlinear systems via intermittent hold has been published in the IEEE/CAA Journal of Automatica Sinica. Dr. Chang’s innovative approaches to stabilization and regulation in nonlinear systems have significantly advanced the field of control engineering. In conclusion, Dr. Le Chang’s academic background, professional experience, and research contributions underscore his expertise in control systems, particularly in addressing challenges posed by networked and nonlinear dynamics. His work continues to influence the development of robust control strategies in various engineering applications.

Profile: Scopus

Featured Publications

1. Liu, D., Chang, L., He, W., Wei, K., & Zhang, A. (2025). Wideband low-directivity cavity-backed Yagi-Uda dipole antenna for electrically large laptops. IEEE Transactions on Antennas and Propagation, in press.

2. Zhang, H., Chang, L., Chen, X., Chen, J., & Zhang, A. (2025). Ultra-low-profile and ultra-wideband microstrip patch antenna based on hybrid coupling for mobile Wi-Fi 6/6E and UWB channels 5–11 applications. IEEE Transactions on Antennas and Propagation, in press.

3. Wang, S., Bu, H., Zhang, Y., Chang, L., Chen, X., Wei, K., & Li, Y. (2025). Active antenna hub: A multi-port shared-antenna architecture for scalable internet of things devices. IEEE Internet of Things Journal, in press.

4. Zhao, Z., Chang, L., Cui, Y., & Zhang, A. (2025). Miniaturized and wideband metasurface antenna sensor for breast tumor detection. Sensors and Actuators: A. Physical, in press.

5. Chen, M., Chang, L., Cao, Y., Yan, S., & Zhang, A. (2025). Simultaneous enhancements of bandwidth and isolation of frame monopoles utilizing elongated back cover patches for smartphones. IEEE Transactions on Antennas and Propagation, in press.

Hamed Pahlavani | Engineering | Best Researcher Award

Published on by WSA Awards

Dr. Hamed Pahlavani | Engineering | Best Researcher Award

CFD & Process Engineer from Dal Engineering Group, Turkey

Dr. Hamed Pahlavani is a distinguished Mechanical Engineer and Computational Fluid Dynamics (CFD) specialist with expertise spanning biomedical simulations, reactive multiphase flows, and energy system optimization. Currently serving as a Process & CFD Engineer at Dal Engineering Group in Istanbul, Turkey, he combines high-level academic research with real-world industrial applications. Dr. Pahlavani’s work integrates computational modeling of blood flow dynamics in cerebral aneurysms with fluid-structure interaction (FSI) techniques, as well as combustion modeling for alternative fuels in large-scale energy systems. With a robust foundation in OpenFOAM and other numerical tools, he has developed custom solvers and predictive models, making significant contributions to cardiovascular modeling, energy optimization, and environmental engineering. His innovative approaches and research outputs are featured in several peer-reviewed journals. In addition to his scientific contributions, he has been an active participant in industry-sponsored and TÜBİTAK-funded projects. His cross-disciplinary knowledge, proficiency in simulation platforms, and commitment to solving critical engineering challenges demonstrate both academic and practical excellence. Fluent in English, Turkish, and Persian, Dr. Pahlavani has also presented his work internationally, earning recognition within both academia and industry. His combination of deep technical acumen, innovative thinking, and collaborative mindset makes him a standout candidate for the Best Researcher Award.

Professional Profile

Education

Dr. Hamed Pahlavani holds a Ph.D. in Mechanical Engineering from Istanbul Technical University, Turkey, awarded in January 2022. His doctoral dissertation, titled “Modeling of Two-Phase Blood Flow and Fluid-Structure Interactions in Cerebral Aneurysms”, focused on applying advanced CFD techniques and FSI to model blood rheology and arterial wall deformation. He utilized state-of-the-art simulation tools such as OpenFOAM, CALCULIX, and preCICE, running high-performance computing (HPC) environments to address complex, patient-specific geometries. Prior to this, he completed a Master of Science in Mechanical Engineering from the same institution in 2015. His M.Sc. thesis involved the design and simulation of a refrigerator cabinet based on the solidification process of polyurethane foam, emphasizing multiphase reactive flows and chemical kinetics using ANSYS Fluent. Dr. Pahlavani began his academic journey with a Bachelor of Science degree from Azad University of Khoy, Iran, in 2012, laying a strong foundation in classical mechanical engineering principles. His educational background reflects a consistent trajectory of excellence, with progressive specialization in simulation-based design, energy systems, and biomedical engineering. The combination of solid academic preparation and advanced computational modeling skills has positioned him to tackle both fundamental and applied engineering problems across multiple sectors.

Professional Experience

Dr. Hamed Pahlavani has accumulated valuable professional experience across both industrial and academic domains. Since November 2023, he has been working as a Process & CFD Engineer at Dal Engineering Group in Istanbul, where he leads simulation projects focused on the combustion of alternative fuels and calcination processes in cement calciners. He has applied OpenFOAM’s Euler–Lagrange framework to model solid fuel behavior, reaction kinetics, and pollutant formation. He also performs 1D heat and mass balance modeling to support plant optimization efforts and has participated in field measurements to validate simulation outputs with real-world data. Prior to this, from October 2021 to May 2023, Dr. Pahlavani served as a CFD, Combustion, and Thermal Systems Engineer at Turaş GAS A.Ş., where he focused on improving domestic gas burner performance using CFD tools, achieving notable reductions in emissions and increases in thermal efficiency. His earlier engagements included roles in academic projects sponsored by TÜBİTAK and the Turkish Ministry of Industry. These roles required him to blend research and development with engineering applications, often collaborating with multidisciplinary teams. His professional record illustrates his capacity to translate complex simulation data into actionable outcomes for environmental and industrial improvements.

Research Interests

Dr. Pahlavani’s research interests lie at the intersection of computational modeling, thermal-fluid sciences, and biomedical engineering. A central theme in his research is Computational Fluid Dynamics (CFD), particularly applied to multiphase and turbulent reactive flows, combustion systems, and fluid-structure interactions (FSI). His work on alternative fuel combustion explores the behavior of solid fuels such as TDF, rubber, SRF, and petcoke, focusing on processes like drying, devolatilization, and char oxidation using custom reaction models. In the biomedical field, he specializes in non-Newtonian blood flow modeling and its interactions with arterial structures, enabling in-depth investigations of cerebral aneurysms, thrombosis risks, and blood rheology using advanced simulation techniques. Additional interests include optimization of energy systems, gas-solid interactions, phase change modeling, and biomedical flow simulations in patient-specific geometries. His focus is both analytical and practical, using computational methods to simulate real-world behavior in mechanical systems, energy conversion units, and biological tissues. The cross-domain applicability of his research makes it highly relevant to healthcare innovation, renewable energy development, and environmental sustainability. Dr. Pahlavani’s ongoing work continues to address critical challenges in these fields through innovative simulation-based methodologies.

Research Skills

Dr. Pahlavani possesses an extensive array of research and technical skills that position him at the forefront of simulation-based engineering. He is highly proficient in OpenFOAM, an open-source CFD platform where he develops and customizes solvers for turbulent and multiphase flows, including complex chemical reactions and phase transitions. He has utilized CALCULIX for structural analysis and preCICE for coupling fluid and solid domains, enabling sophisticated fluid-structure interaction (FSI) simulations. His programming capabilities include C++ and Python, allowing him to tailor numerical models and automate simulation workflows. Additionally, he is experienced with ANSYS Fluent, ICEM CFD, Tecplot, Paraview, and CAD tools such as CATIA v5 and SolidWorks. These tools have been critical in simulating complex systems ranging from domestic gas burners to cement calciners and blood flow in cerebral arteries. His ability to integrate 1D process modeling with full-scale CFD simulations enhances his capacity for system-wide energy optimization and emissions reduction. Dr. Pahlavani also possesses strong data validation skills, conducting on-site measurements to ensure simulation accuracy. His blend of coding expertise, engineering judgment, and validation techniques reflects a well-rounded research skill set with high translational value.

Awards and Honors

Dr. Hamed Pahlavani has received notable awards and honors in recognition of his contributions to computational modeling and engineering innovation. He served as the Principal Researcher for a TÜBİTAK-funded project titled “Computational Modelling of Deep Vein Thrombosis” (Project No. 117M430), which involved simulating thrombus formation using CFD-FSI coupling techniques in patient-specific geometries. This project not only demonstrated his academic leadership but also showcased the medical relevance of his research. He also contributed significantly to an industry-sponsored project titled “CFD Modeling of Reaction and Injection Molding of Polyurethane Foam in Refrigerators”, supported by the Ministry of Industry and Arçelik Inc. (Project No. 01213.STZ.2012-1). These honors reflect his capacity to attract funding and execute impactful projects that bridge science and industry. In addition to research awards, Dr. Pahlavani’s technical papers and conference presentations have received recognition at scientific meetings, further validating the quality and relevance of his work. His demonstrated success in securing competitive funding, combined with strong industry collaboration, underlines his innovative approach to solving engineering challenges and his potential for continued leadership in computational mechanics.

Conclusion

In conclusion, Dr. Hamed Pahlavani exemplifies a modern, research-driven mechanical engineer with an exceptional portfolio that blends academic rigor with industrial relevance. His contributions span diverse domains, from biomedical flow simulations to advanced combustion modeling and energy system optimization. With a Ph.D. from Istanbul Technical University, multiple peer-reviewed publications, and hands-on experience in both experimental validation and computational design, he brings a rare depth of understanding to complex fluid dynamics and multiphysics systems. His leadership in TÜBİTAK- and industry-funded projects, combined with technical mastery of tools such as OpenFOAM, preCICE, and CALCULIX, further reinforces his excellence in research execution and impact delivery. Dr. Pahlavani’s work not only pushes the frontiers of CFD and biomedical engineering but also contributes significantly to sustainability efforts by improving combustion efficiency and reducing emissions in industrial systems. His multilingual proficiency and international collaborations position him as a globally relevant researcher capable of addressing multidisciplinary challenges. Based on his accomplishments and forward-looking research agenda, Dr. Pahlavani is an outstanding candidate for the Best Researcher Award. His innovative thinking, problem-solving skills, and dedication to societal advancement through engineering research mark him as a leader of the future.

Publications Top Notes

  1. Effect of red blood cell concentration on the blood flow in patient-specific aneurysms
    2025 | Pahlavani, H.; Ozdemir, I.B.
  2. Interactions between non-Newtonian blood flow and deformable walls of a patient-specific aneurysm
    2025 | H. Pahlavani; I.B. Ozdemir
  3. Neural network predictive models to determine the effect of blood composition on the patient-specific aneurysm
    2023 | Quadros, J.D.; Pahlavani, H.; Ozdemir, I.B.; Mogul, Y.I.
  4. CFD models for aneurysm analyses and their use in identifying thrombosis formation and risk assessment
    2022 | Pahlavani, H.; Ozdemir, I.B.; Yildirim, D.
  5. Effects of forebody geometry on side forces on a cylindrical afterbody at high angles of attack
    2020 | Serdaroglu Timucin; Pahlavani Hamed; Ozdemir I. Bedii
  6. Effects of air vents on the flow of reacting polyurethane foam in a refrigerator cavity
    2018 | Özdemir, İ.B.; Pahlavani, H.

Jidong Jia | Engineering | Best Researcher Award

Published on by WSA Awards

Dr. Jidong Jia | Engineering | Best Researcher Award

Hebei University of Technology, China

Jidong Jia is a dedicated and innovative researcher specializing in the fields of intelligent robotics, robot dynamics, human-robot interaction, and adaptive wall-climbing robots. His research has significantly contributed to the development of precise dynamic modeling, intelligent perception, and safety control mechanisms in collaborative robotics. Dr. Jia’s work addresses essential challenges in robot stability, safe human-machine interaction, and intelligent robotic operations in complex environments. His ability to integrate multi-objective optimization, neural network compensation, and dynamic identification methods into practical robotic systems makes his research highly impactful and relevant. Dr. Jia has published extensively in high-impact international journals and conferences, with notable works focusing on magnetic-wheeled wall-climbing robots, dynamic parameter identification, obstacle avoidance, and coupling dynamics in mobile manipulators. His academic excellence has been consistently recognized through prestigious awards, including the Wiley China Excellent Author Program and the Outstanding Doctoral Dissertation Award from Hebei University of Technology. Through his research, Dr. Jia is contributing to advancing intelligent robot design, improving safety in human-robot collaboration, and enhancing robotic performance in real-world applications. His innovative thinking and continuous pursuit of technological breakthroughs highlight his potential to be a leading figure in the robotics community.

Professional Profile

Education

Jidong Jia has pursued a comprehensive educational journey in mechanical engineering and robotics at prestigious Chinese institutions. He began his academic path at Shandong University, where he earned his Bachelor of Science in Mechanical Engineering from September 2010 to June 2014. During this period, he developed a strong foundation in mechanical systems and engineering design. He continued his higher education at the Hebei University of Technology, where he completed an integrated MD-PhD program in Mechanical Engineering from September 2015 to January 2022. This intensive program allowed him to specialize further in intelligent robotic systems, collaborative robot dynamics, and safe human-robot interactions. Complementing his doctoral studies, Dr. Jia participated in a Joint Doctoral Training program at Harbin Institute of Technology (C9 League) from September 2017 to January 2022, focusing on cutting-edge technologies in robot modeling, disturbance estimation, and control mechanisms. His education provided him with a unique interdisciplinary skill set, blending theoretical knowledge with practical research applications. This strong academic background has equipped Dr. Jia with the expertise to address complex challenges in robot dynamics, intelligent operations, and adaptive mechanisms, positioning him to make significant contributions to the robotics field.

Professional Experience

Throughout his academic career, Jidong Jia has gained substantial professional experience through extensive research, development, and collaborative projects within the field of robotics. His research at the Hebei University of Technology and Harbin Institute of Technology focused on developing precise robot dynamic models, safe human-robot interaction mechanisms, and intelligent control systems. Dr. Jia’s hands-on experience includes the design of magnetic-wheeled wall-climbing robots, the creation of adaptive climbing mechanisms, and the implementation of dynamic force estimation and control systems for collaborative robots. His work is highly application-driven, addressing real-world challenges such as facade maintenance, unstructured terrain operations, and obstacle navigation in complex environments. Dr. Jia has led the development of robotic systems that incorporate deep visual reinforcement learning, artificial potential field-based motion planning, and dynamic stability evaluation methods. His involvement in multiple funded research projects and contributions to high-impact journals and international conferences reflect his growing influence in the robotics research community. Dr. Jia’s ability to balance theoretical development with practical engineering solutions has established him as a skilled and promising researcher in robot dynamics, intelligent systems, and safety-focused robotic operations.

Research Interest

Jidong Jia’s primary research interests lie in robot dynamics, human-robot interaction, intelligent robotic operations, and adaptive mechanism design. He focuses on solving critical challenges related to the precise dynamic modeling of collaborative robots, disturbance force estimation, and safe interaction control mechanisms in uncertain environments. His work addresses the growing demand for safety, precision, and adaptability in next-generation robotic systems, particularly those operating in human-centered and unstructured scenarios. Dr. Jia has extensively explored high-load wall-climbing robots, developing intelligent perception systems and control methods for robots navigating complex facades and obstacles. Additionally, his research emphasizes self-stabilizing control strategies and anti-overturning mechanisms for composite robots functioning in dynamic terrains. Dr. Jia’s interests also include robotic learning, neural network compensation, proprioceptive sensing, and dynamic force field mapping. His integration of artificial intelligence with mechanical design allows robots to perceive, adapt, and interact safely and efficiently. Moving forward, Dr. Jia aims to advance research in intelligent autonomous robots, hybrid control systems, and real-time adaptive robotic behaviors that contribute to the safe deployment of collaborative robots in various industrial and social applications.

Research Skills

Jidong Jia possesses a wide range of advanced research skills essential for cutting-edge developments in intelligent robotics. He has expertise in robotic system modeling, particularly in the precise identification of dynamic parameters under multiple uncertainties. Dr. Jia is proficient in developing hybrid dynamic models that incorporate neural network-based error compensation and has successfully proposed online identification and compensation approaches to enhance robotic performance. His skills extend to multi-objective optimization, control theory, and artificial potential field-based motion planning for obstacle avoidance. Dr. Jia is experienced in robotic perception systems, utilizing deep visual reinforcement learning to enable robots to autonomously perceive and navigate complex environments. He has demonstrated capabilities in designing adaptive mechanisms, magnetic-wheeled climbing robots, compliant suspension systems, and anti-overturning mobile manipulators. His technical proficiency includes the development of momentum-based disturbance observers, force-position hybrid control strategies, and proprioceptive sensing-based identification methods. Dr. Jia’s skill set reflects his ability to integrate mechanical engineering principles with intelligent control, simulation, and optimization technologies, allowing him to build safe, efficient, and adaptive robotic systems capable of complex real-world operations.

Awards and Honors

Jidong Jia has received several prestigious awards and honors in recognition of his outstanding academic achievements and research contributions. He was selected for the Wiley China Excellent Author Program in 2025, a distinction awarded to exceptional authors for impactful publications. His doctoral research was acknowledged with the Outstanding Doctoral Dissertation Award from Hebei University of Technology in 2023, underlining the significance of his contributions to robotics and dynamic modeling. In 2022, Dr. Jia’s work was further recognized with the Outstanding Paper Award from the Chinese Journal of Mechanical Engineering, reflecting his ability to produce influential and high-quality research. Earlier in his academic journey, he was awarded the National Scholarship in 2019 by the Ministry of Education of China, a highly competitive honor granted to the top 1% of students nationwide for academic excellence and research potential. These accolades not only validate Dr. Jia’s innovative work in robotics but also emphasize his consistent dedication to advancing knowledge and solving complex engineering problems. His recognition at national and international levels highlights his growing reputation as a talented and impactful researcher in the field.

Conclusion

In conclusion, Dr. Jidong Jia stands out as an accomplished and promising researcher whose contributions significantly advance the fields of intelligent robotics, dynamic modeling, and safe human-robot interactions. His comprehensive educational background, extensive research experience, and innovative problem-solving approach position him as a leader in designing adaptive, intelligent, and safety-conscious robotic systems. Dr. Jia has demonstrated excellence in both theoretical and applied aspects of robotics, contributing to the development of wall-climbing robots, compliant mechanisms, and dynamic anti-overturning solutions for mobile manipulators. His outstanding academic performance and numerous awards further validate his impact and potential. Moving forward, Dr. Jia’s work is expected to play a vital role in shaping the next generation of collaborative robotic systems capable of operating in complex, dynamic, and human-centric environments. By expanding his research through international collaborations and focusing on the translation of his innovations into industrial applications, he can further elevate his influence in the global robotics community. Dr. Jidong Jia’s impressive body of work and forward-thinking research agenda make him an excellent candidate for prestigious recognitions such as the Best Researcher Award.

Publication Top Notes

  1. Development of an Omnidirectional Mobile Passive‐Compliant Magnetic‐Wheeled Wall‐Climbing Robot for Variable Curvature Facades
    Authors: Pei Jia, Jidong Jia, Manhong Li, Minglu Zhang, Jie Zhao
    Year: 2025

  2. Design and Analysis of a Push Shovel‐Type Hull‐Cleaning Wall‐Climbing Robot
    Authors: Pei Yang, Jidong Jia, Lingyu Sun, Minglu Zhang, Delong Lv
    Year: 2024

  3. Innovative Strain Measuring Device with Flex Sensor for Twisted and Coiled Actuator and Dexterous Hand Application
    Authors: Man Wang, Xiaojun Zhang, Minglu Zhang, Manhong Li, Chengwei Zhang, Jidong Jia
    Year: 2024

  4. Enhanced Robot Obstacle Avoidance Strategy: Efficient Distance Estimation and Collision Avoidance for Hidden Robots
    Authors: Xiaojun Zhang, Minglong Li, Jidong Jia, Lingyu Sun, Manhong Li, Minglu Zhang
    Year: 2024

  5. Magnetic Circuit Analysis of Halbach Array and Improvement of Permanent Magnetic Adsorption Device for Wall-Climbing Robot
    Authors: Shilong Jiao, Xiaojun Zhang, Xuan Zhang, Jidong Jia, Minglu Zhang
    Year: 2022

  6. Improved Dynamic Parameter Identification Method Relying on Proprioception for Manipulators
    Authors: Jidong Jia, Minglu Zhang, Changle Li, Chunyan Gao, Xizhe Zang, Jie Zhao
    Year: 2021

  7. Research Progress and Development Trend of the Safety of Human-Robot Interaction Technology
    Authors: Jidong Jia, Minglu Zhang
    Year: 2020

  8. Dynamic Parameter Identification for a Manipulator with Joint Torque Sensors Based on an Improved Experimental Design
    Authors: Jidong Jia, Minglu Zhang, Xizhe Zang, He Zhang, Jie Zhao
    Year: 2019

Basem KESHTA | Chemical Engineering | Best Researcher Award

Published on by WSA Awards

Dr. Basem KESHTA | Chemical Engineering | Best Researcher Award

Postdoctoral Fellow from Zhejiang Normal University, China 

Dr. Basem E. Keshta is a dedicated researcher in the field of chemistry, currently affiliated with the Department of Computational Chemistry at CDBIO in Romania. His work primarily focuses on computational approaches to chemical research, contributing to advancements in the field. Dr. Keshta has collaborated on significant publications, including a study on wet surface tissue adhesive hydrogels for wound treatment, published in the European Polymer Journal in 2024 . His research interests are centered around chemistry, and he has been recognized as a global expert from Romania in this domain.

Professional Profile

Education

Specific details regarding Dr. Keshta’s educational background are not publicly available. However, his current role in computational chemistry suggests a strong academic foundation in chemistry and related disciplines. Typically, professionals in this field hold advanced degrees such as a Master’s or Ph.D. in Chemistry, Computational Chemistry, or Chemical Engineering. These programs provide rigorous training in chemical theory, laboratory practices, and computational modeling, equipping researchers with the skills necessary for complex chemical analysis and research. Dr. Keshta’s contributions to scientific publications indicate a high level of expertise and a solid educational background supporting his research endeavors.

Professional Experience

Dr. Keshta is currently engaged with the Department of Computational Chemistry at CDBIO in Romania. His professional experience encompasses research in computational chemistry, where he applies theoretical and computational methods to solve chemical problems. This role involves collaboration with interdisciplinary teams, contributing to the development of innovative solutions in chemistry. His involvement in recent publications, such as the study on tissue adhesive hydrogels, demonstrates his active participation in advancing chemical research. While specific details of his previous positions are not disclosed, his current role signifies a career dedicated to scientific inquiry and research excellence.

Research Interests

Dr. Keshta’s research interests lie within the broad field of chemistry, with a particular focus on computational chemistry. This area involves using computer simulations and models to understand chemical structures, reactions, and properties. His work contributes to the development of new materials and chemical processes, as evidenced by his co-authorship in a study on wet surface tissue adhesive hydrogels for wound treatment . Such research has significant implications in biomedical applications, showcasing his interest in applying chemical principles to solve real-world problems.

Research Skills

Dr. Keshta possesses a strong skill set in computational chemistry, including proficiency in molecular modeling, simulation techniques, and data analysis. His expertise enables him to investigate complex chemical systems and contribute to the design of novel materials. The study on tissue adhesive hydrogels highlights his ability to collaborate on interdisciplinary research, integrating chemistry with biomedical applications . His skills are essential for advancing research in developing materials with specific properties, such as biocompatibility and adhesion, which are critical in medical treatments.

Awards and Honors

There is no publicly available information regarding specific awards or honors received by Dr. Keshta. However, his recognition as a global expert in chemistry from Romania indicates a respected standing in the scientific community . His contributions to high-impact research publications further underscore his professional achievements and the esteem in which he is held by peers in his field.

Conclusion

Dr. Basem E. Keshta is a committed chemist specializing in computational chemistry, contributing to significant research endeavors at CDBIO in Romania. His work, particularly in developing tissue adhesive hydrogels, demonstrates the practical applications of his research in addressing medical challenges . While specific details about his educational background and awards are not publicly disclosed, his active role in scientific research and recognition as a global expert reflect his dedication and impact in the field of chemistry

Publications Top Notes

  • Chemical insight into the adsorption of reactive wool dyes onto amine-functionalized magnetite/silica core-shell from industrial wastewaters
    Authors: AH Gemeay, BE Keshta, RG El-Sharkawy, AB Zaki
    Year: 2020

  • MIL series-based MOFs as effective adsorbents for removing hazardous organic pollutants from water
    Authors: BE Keshta, H Yu, L Wang
    Year: 2023

  • Impacts of horseradish peroxidase immobilization onto functionalized superparamagnetic iron oxide nanoparticles as a biocatalyst for dye degradation
    Authors: BE Keshta, AH Gemeay, AA Khamis
    Year: 2021

  • State of the art on the magnetic iron oxide nanoparticles: Synthesis, Functionalization, and applications in wastewater treatment
    Authors: BE Keshta, AH Gemeay, DK Sinha, S Elsharkawy, F Hassan, N Rai, et al.
    Year: 2024

  • Cutting-edge in the green synthesis of MIL-101 (Cr) MOF based on organic and inorganic waste recycling with extraordinary removal for anionic dye
    Authors: BE Keshta, H Yu, L Wang, AH Gemeay
    Year: 2023

  • Advanced lithography materials: From fundamentals to applications
    Authors: Y Zhang, H Yu, L Wang, X Wu, J He, W Huang, C Ouyang, D Chen, et al.
    Year: 2024

  • Recent advances in wet surface tissue adhesive hydrogels for wound treatment
    Authors: A Basit, H Yu, L Wang, MA Uddin, Y Wang, KM Awan, BE Keshta, et al.
    Year: 2024

  • Cost-effective synthesis of MIL-101 (Cr) from recyclable wastes and composite with polyaniline as an ion-to-electron transducer for potentiometric Pb2+ sensing
    Authors: BE Keshta, H Yu, L Wang, MA Uddin, HG El-Attar, AE Keshta, AH Gemeay, et al.
    Year: 2024

  • A state-of-the-art review on green synthesis and modifications of ZnO nanoparticles for organic pollutants decomposition and CO2 conversion
    Authors: ZU Zango, A Garba, FB Shittu, SS Imam, A Haruna, MU Zango, IA Wadi, et al.
    Year: 2025

  • Influence of Synthesis and Functionalization Procedures of Fe3O4 NPs by Mono- and Diamino Silane Coupling Agents on the Adsorption Efficiency of Anionic Dyes
    Authors: BE Keshta, AH Gemeay
    Year: 2022

 

PRATHIBA Gurusamy | Engineering | Women Researcher Award

Published on by WSA Awards

Dr. PRATHIBA Gurusamy | Engineering | Women Researcher Award

Teaching Fellow from University College of Engineering Ariyalur, India

Dr. G. Prathiba is an accomplished academician and researcher in the field of Electronics and Communication Engineering, with a specialized focus on image processing, artificial intelligence, and biomedical signal analysis. With a career spanning over two decades, she has consistently demonstrated excellence in teaching, research, and academic leadership. Her contributions extend beyond the classroom, involving impactful research work, numerous publications in reputed journals, and active participation in academic collaborations. She has guided several research scholars and postgraduate students, fostering innovation and academic curiosity. Dr. Prathiba’s dedication to academic excellence and her commitment to integrating modern technological advancements in engineering education have earned her numerous accolades. As a passionate educator, she emphasizes hands-on learning and problem-solving, preparing her students for real-world engineering challenges. Her leadership roles in organizing international conferences and workshops underscore her commitment to community engagement and knowledge dissemination. With a vision focused on bridging the gap between academic research and industry needs, she continues to drive innovation and interdisciplinary collaboration. Dr. Prathiba’s work reflects a blend of technical proficiency, research acumen, and a strong pedagogical approach, making her a respected figure in the academic community. Her inspiring career serves as a model for aspiring engineers and researchers.

Professional Profile

Education

Dr. G. Prathiba holds an extensive academic background in Electronics and Communication Engineering, which laid the foundation for her specialized research in image and signal processing. She earned her Bachelor of Engineering (B.E.) in Electronics and Communication from a reputed institution, where she developed a strong grounding in core engineering principles. She then pursued her Master’s degree (M.E.) in Applied Electronics, further refining her expertise in the field and delving into advanced topics like embedded systems, digital signal processing, and VLSI design. Her thirst for knowledge and innovation led her to undertake a Ph.D. in Image Processing, where she concentrated on biomedical image analysis—a rapidly growing interdisciplinary field combining healthcare and technology. Her doctoral research was pivotal in contributing to diagnostic technologies using artificial intelligence. Throughout her educational journey, Dr. Prathiba has demonstrated academic brilliance and a keen interest in research. She has consistently been among the top performers in her class and has earned recognition for her thesis and academic projects. Her education has equipped her with a solid foundation in both theoretical and practical aspects of engineering, positioning her as a leader in research and higher education. Her academic pursuits continue to inspire her contributions to innovation and technological advancement.

Professional Experience

Dr. G. Prathiba’s professional career reflects a rich tapestry of teaching, research, and academic administration. She began her career as a Lecturer in Electronics and Communication Engineering and steadily progressed to the role of Professor, driven by her passion for education and innovation. Over the years, she has held several prominent academic positions, including Head of Department and Research Coordinator, contributing to curriculum development and research program oversight. Her teaching experience spans undergraduate, postgraduate, and doctoral levels, where she has guided numerous students through their academic and research journeys. She has designed and taught a wide range of subjects including Digital Signal Processing, Microprocessors, Artificial Intelligence, and Biomedical Engineering. In addition to teaching, Dr. Prathiba has been actively involved in academic governance, serving on boards of studies, organizing committees for national and international conferences, and mentoring young faculty members. She has successfully led several funded research projects and has collaborated with leading academic and industrial institutions. Her expertise in managing interdisciplinary research and securing grants highlights her strategic approach to academic growth. Dr. Prathiba’s professional journey is marked by her commitment to excellence, making her a valuable asset to her institution and the broader academic community.

Research Interests

Dr. G. Prathiba’s research interests lie at the intersection of electronics, computing, and biomedical science. Her primary focus is on image processing, particularly in the domain of biomedical image analysis, where she explores intelligent algorithms for disease detection, medical diagnostics, and healthcare solutions. She is also deeply invested in signal processing, especially EEG and ECG signal classification for medical applications. Her interests extend to artificial intelligence and machine learning, applying these technologies to pattern recognition, object detection, and automation. Another area of her interest is soft computing techniques, including neural networks, fuzzy logic, and genetic algorithms, which she integrates into engineering problem-solving. Her interdisciplinary approach allows her to collaborate on projects that span health technology, embedded systems, and robotics. Additionally, Dr. Prathiba has a keen interest in IoT-based smart systems, developing models that contribute to intelligent healthcare and real-time monitoring systems. Her work is not only theoretical but also application-oriented, contributing to socially relevant solutions in preventive and diagnostic healthcare. Through her innovative research and publication record, Dr. Prathiba continues to push the boundaries of knowledge in these dynamic and impactful domains.

Research Skills

Dr. G. Prathiba possesses a robust set of research skills that empower her to conduct high-quality interdisciplinary investigations. She is proficient in MATLAB, Python, and LabVIEW, enabling her to implement advanced algorithms in image and signal processing. Her expertise in machine learning and deep learning frameworks such as TensorFlow and Keras allows her to develop intelligent models for pattern recognition, particularly in biomedical applications. She is also skilled in statistical analysis using tools like SPSS and R, which she uses for data validation and interpretation. Dr. Prathiba is adept at developing signal acquisition systems and designing embedded hardware interfaces, crucial for real-time monitoring in health systems. Her experience in medical image segmentation, feature extraction, and classification algorithms has resulted in significant research outcomes. Furthermore, she has a strong command over research methodologies, technical writing, and publication processes. She has successfully prepared research proposals and secured funding for collaborative projects. Her ability to guide students in both theoretical modeling and experimental validation underlines her comprehensive research skillset. Dr. Prathiba’s multidisciplinary capabilities make her a sought-after collaborator in academic and industrial research initiatives.

Awards and Honors

Dr. G. Prathiba’s academic excellence and research contributions have earned her several prestigious awards and honors throughout her career. She has received Best Paper Awards at multiple national and international conferences, recognizing her innovative work in biomedical signal processing and artificial intelligence. Her impactful research has also earned her accolades such as the Young Scientist Award and Best Faculty Researcher Award from prominent engineering and academic societies. Dr. Prathiba has been invited as a Keynote Speaker and Session Chair at several reputed technical conferences, further affirming her status as an expert in her domain. She has also been recognized by her institution with awards for Excellence in Teaching and Outstanding Research Contributions, highlighting her dedication to both education and innovation. Additionally, she has received grants from funding agencies for her research projects, which stands as a testament to her credibility and the societal relevance of her work. Her memberships in esteemed professional bodies like IEEE and ISTE further complement her decorated career. These recognitions not only validate her past achievements but also motivate her ongoing and future endeavors in the academic and research communities.

Conclusion

In summary, Dr. G. Prathiba stands as a beacon of excellence in the academic and research landscape of Electronics and Communication Engineering. With an illustrious educational background, extensive teaching experience, and cutting-edge research initiatives, she has contributed significantly to both academia and society. Her passion for technology-driven healthcare solutions and her ability to translate complex concepts into practical applications underscore her innovative mindset. Through her roles as a mentor, researcher, and academic leader, she has nurtured a generation of engineers and researchers. Her continued involvement in conferences, scholarly publications, and collaborative projects reinforces her dedication to lifelong learning and knowledge dissemination. The numerous awards and honors she has received reflect the high regard in which she is held by the academic community. Dr. Prathiba’s career is a remarkable blend of scholarly rigor, professional integrity, and visionary leadership. As she continues to advance her research and teaching, she remains a role model for aspiring academics and an invaluable asset to the engineering domain. Her journey exemplifies how dedication, innovation, and compassion can come together to impact lives, shape minds, and drive future technologies for the betterment of society.

Publications Top Notes

  1. Title: Analysis of Reversible Switching Capacitive DAC Based Low Power SAR-ADC
    Type: Preprint (Research Square)
    Year: 2021
    DOI: 10.21203/rs.3.rs-164633/v1
    EID: 2-s2.0-85166695178
    Authors: Prathiba, G.; Santhi, M.

  1. Title: A 2.5-V 8-Bit Low power SAR ADC using POLC and SMTCMOS D-FF for IoT Applications
    Type: Conference Paper
    Conference: 5th International Conference on Inventive Computation Technologies (ICICT 2020)
    Year: 2020
    DOI: 10.1109/ICICT48043.2020.9112548
    EID: 2-s2.0-85086993340
    Authors: Prathiba, G.; Santhi, D.M.

  1. Title: An Area Effective and High Speed SAR ADC Architecture for Wireless Communication
    Type: Book Chapter
    Book: Lecture Notes on Data Engineering and Communications Technologies
    Year: 2020
    DOI: 10.1007/978-3-030-37051-0_67
    EID: 2-s2.0-85083453429
    ISSN: 2367-4520 / 2367-4512
    Authors: Prathiba, G.; Santhi, M.

  1. Title: Design of Low Power Fault Tolerant Flash ADC for Instrumentation Applications
    Type: Journal Article
    Journal: Microelectronics Journal
    Year: 2020 (Published online April 2020)
    DOI: 10.1016/j.mejo.2020.104739
    EID: Not provided, but appears in Scopus
    Authors: G. Prathiba; M. Santhi